How to Install TWRP Recovery via Fastboot



  • Bootloader / Fastboot mode allows you to flash any partition on a device, be it system, boot, recovery, cache, anything. And not just the partition images from OEMs, you can also flash the custom built .img files via fastboot.

    Note: This guide assumes that your device has an unlocked bootloader

    1.Download a TWRP recovery .img file compatible for your device.

    2.Setup ADB and Fastboot on your PC.

    3.Enable USB debugging on your device:

    4.Open Settings on your device.

    • Go to About phone and tap seven times on Build number, this will enableDeveloper options.

    • Now go back to Settings and you’ll see “Developer options” there, open it.

    • Tick the USB Debugging checkbox.

    5.Open the folder where your TWRP Recovery .img file is saved.

    6.Now open a command window inside that folder. To do that, “Shift + Right click”on any empty white space inside the folder and then select “Open command window here” from the context menu.

    7.Connect your device to the PC. And type the following into the command window we opened in step 4 above to boot your device into bootloader/fastboot mode:

    0_1471509449379_1.png

    If your asks for permission to “Allow USB debugging”, tap OK.

    8. Once your device boots into bootloader mode, issue the following command into command window to flash the TWRP recovery .img file:

    0_1471509497554_2.png
    Here modify twrp.img with the name of your TWRP recovery .img file, OR change your TWRP recovery filename to twrp.img and use the command above.

    9. Once TWRP is successfully flashed on your device, issue the following command to reboot:

    0_1471509576789_3.png

    Source: androiding.how



  • Ya, it is not a complicated process to Install TWRP Recovery via Fastboot. These steps are easy.


You may be interested in..

 

Looks like your connection to SuperSU Forum-where rooting fans gather was lost, please wait while we try to reconnect.