Root Galaxy S4 LTE-A on Android 5.0.1 Lollipop Build I9506XXUDOA6



  • Android 5.0.1 Lollipop update was previously rolled out with build number I9506XXUDOA6 by Samsung last week for Galaxy S4 LTE-A (GT-I9506). If you have not yet updated your S4 GT-I9506 to this latest build then we’ve already shared a guide on how to install Android 5.0.1 Lollipop I9506XXUDOA6 Official build on Galaxy S4 LTE-A GT-I9506 [Guide]. But if you have already installed Android 5.0.1 I9506XXUDOA6 Lollipop then you’ll be eager to get a root access to the internal system of your phone to enjoy root apps, kernals, custom recoveries and much more.

    Thanks to CastagnaIT (XDA Developer) for sharing a simple guide that can be used to root Galaxy S4 LTE-A on Android 5.0.1 Lollipop official build I9506XXUDOA6. In this guide we’ll use Chainfire’s SuperSU root package and then flash TWRP recovery on the Galaxy S4 to get root access using ODIN. So if you are ready to go ahead then follow the given guide to root Android 5.0.1 Lollipop on Galaxy S4 LTE-A.
    0_1471932108484_images.jpg

    Note:
    This tutorial having the CF-Auto-Root file can be used with the Galaxy S4 LTE-A GT-I9506. Do not try to install this file on any other or incorrect variant, as a result, your device might gets bricked. You can verify the model number of your Galaxy S4 LTE-A by going to Settings > About device > Model Number.

    Warning:
    We will not responsible for any kind of damage occurred to your Samsung Galaxy S4 LTE-A GT-I9506 while rooting on Android 5.0.1 Lollipop build I9506XXUDOA6. Do note that flashing this root package and recovery will trigger the Knox warranty. Proceed at your own risk.

    Before Getting Started:
    Take a proper backup of your important data and settings on your Galaxy S4 LTE-A using a custom recovery. If something goes wrong then you’ll be able to restore the data.
    Download and install correct Galaxy S4 LTE-A (I9506) USB Drivers on the PC.

    Enable USB Debugging Mode on your phone by navigating to Settings > Developer Options > check the USB Debugging option.
    A custom Recovery such as TWRP should be already installed on your Galaxy S4.
    Check the battery level of the Galaxy S4, it should be charged at least about 80% before proceeding to the installation instructions.
    Required Files:
    Download TWRP Recovery
    Download UPDATE-SuperSU.zip
    Download Odin
    Download here
    Steps To Root Galaxy S4 LTE-A on Android 5.0.1 Lollipop with CF-Auto-Root Package:
    Step No 1:- First, download SuperSU root package from the above link on the desktop of your PC for Galaxy S4.

    Step No 2:- Now, plug your Galaxy S4 to the PC using its USB data cable and copy the downloaded root package zipped file (UPDATE-SuperSU.zip) to the root folder of your SD card.

    Step No 3:- Disconnect the device from the PC after copying the SuperSU zipped root file.

    Step No 4:- Turn it OFF in order to enter into Recovery Mode.

    Step No 5:- Turn the device ON while pressing and holding Volume Up + Home + Power keys at the same time for a while.

    Use Volume key to navigate between options
    Power key to select an option
    Step No 6:- While your Galaxy S4 LTE-A is in TWRP Recovery, choose the Install button and navigate to the Update-SuperSU.zip file that you’ve already copied to the root folder of your SD Card. Select the file and confirm the installation process to begin.

    Step No 7:- Reboot the device once the installation is completed successfully.

    Done! You’ve successfully rooted Galaxy S4 LTE-A on the Android 5.0.1 Lollipop I9506XXUDOA6 official build. Follow this guide that will help you to install TWRP recovery on your Galaxy S4 using Odin.

    Let us know in the comments area below if you are facing any problem or having question while rooting your S4 on Android 5.0.1
    Source:Android Geeks


Log in to reply
 

Looks like your connection to SuperSU forum-where rooting fans gather was lost, please wait while we try to reconnect.